Delock Converter 1 x Serial RS-232 to 1 x Serial RS-422/485 with ESD protection 15 kV surge protection 600 W and 3 kV isolation extended temperature range
Description
This RS-232 to RS-485/422 converter by Delock is suitable for all serial devices, e.g. on machine controls, fieldbus systems, measuring instruments, printers or as RS-232 extender. The connected components are protected against surge power by the integrated protection circuits of the converter. The optical isolation suppresses interference and prevents transmission errors as much as possible. The converter is suitable for DIN rail mounting.
Spécifications techniques
- Connectors:
1 x Serial RS-232 DB9 female >
1 x RS-422/485 Terminal Block 7 pin - Modes
2 wire RS-485 (max. 32 devices)
2 wire RS-485 (Echo Mode)
4 wire RS-422 Point to Point
4 wire Multi-Drop RS-485 and RS-422 (max. 10 devices) - ±15 kV ESD protection on all signal pins
- 3 kV optical isolation
- Power Supply: 10 V - 30 V / 0.5 A
- Surge Protection: 600 W peak pulse
- Data transfer rate up to 921.6 Kbps
- Databits: 5, 6, 7, 8
- Stop bits: 1, 1.5, 2
- Parity: even, odd, none, mark, space
- Flow control: none, software XON / XOFF
- 3 x LED indicator
- Operating temperature: - 30 °C ~ 75 °C
- Storage temperature: - 40 °C ~ 85 °C
- Relative humidity: 5 - 95 % (non condensing)
- Housing material: plastic
- Dimensions (LxWxH): ca. 80 x 42 x 22 mm
Configuration système requise
- Device with one free RS-422/485 interface
- Device with one free RS-232 interface
Contenu de l’emballage
- Converter
- Mounting for 35 mm DIN rail
- User manual
General
Fonction
• optical isolation
• Auto RTS Control
• Auto RTS Control
Mounting type
• DIN rail 35 mm
Spécifications techniques
• RS-232 (EIA / TIA)
• RS-422 / RS-485 (EIA / TIA)
• RS-422 / RS-485 (EIA / TIA)
Supported operating system
• Indépendant du système d’exploitation, pas besoin d’installer un pilote
Témoin DEL
• 3 x PWR / RXD / TXD
Protection
• Input overvoltage protection
• ESD (Electrostatic Discharge)
• pic de 600 W
• ESD (Electrostatic Discharge)
• pic de 600 W
Interface
Connecteur 1
• 1 x série RS-232 DB9 femelle
Connecteur 2
• 1 x RS-422/485 Terminal Block 7 pin
Technical characteristics
Débit de données
• up to 921.6 Kbps
Storage temperature
• -40 °C ~ 85 °C
Température de fonctionnement
• -30 °C ~ 75 °C
Humidity
• 5 ~ 95 %
Data transmission
• asynchronous
• full duplex
• full duplex
Physical characteristics
Matériau du boîtier
• Plastique
Longueur
• 96.7 mm
Width
• 42 mm
Height
• 22.2 mm
Couleur
• noir
Overvoltage protection
• 15 kV RS-422 / RS-485
Éléments similaires
Tous les noms et images mentionnés ici sont la propriété de leur fabricant respectif. Sous réserve d’erreurs et de modifications.
Delock Convertisseur 1 x Serial RS-232 à 1 x Serial RS-422/485 avec protection ESD 15 kV de surintensité 600 W et une isolation de 2,5 kV et plage de température étendue
N° produit 87686
Delock Convertisseur RS-232 DB9 série femelle à RS-422/485 DB9 série mâle avec une protection ESD 15 kV
N° produit 62920
Delock Convertisseur 1 x Serial RS-232 DB9 à 1 x Serial RS-485 avec protection ESD 15 kV de surintensité 600 W et plage de température étendue
N° produit 62919
Delock Convertisseur 1 x Serial RS-232 DB9 à 1 x Serial RS-485 avec protection ESD 15 kV de surintensité 600 W
N° produit 64140
Other interface variant
Delock Rallonge RS-232 DB9 femelle RJ45 femelle vers RS-232 DB9 mâle RJ45 femelle, protection ESD 1200 m, portée étendue, plage de température
N° produit 63934
Delock Converter Ethernet LAN TCP/IP > Serial RS-232
N° produit 62504
Delock Converter Ethernet LAN RJ45 10/100 Mbps jack to serial RS-232 DB9 male with nuts
N° produit 62976