Delock Converter 1 x Serial RS-232 to 1 x Serial RS-422/485 with ESD protection 15 kV surge protection 600 W and 3 kV isolation extended temperature range

Artikelnummer 63467
63467 Delock Converter 1 x Serial RS-232 to 1 x Serial RS-422/485 with ESD protection 15 kV surge protection 600 W and 3 kV isolation extended temperature range
63467
63467
63467
63467
63467
63467 Delock Converter 1 x Serial RS-232 to 1 x Serial RS-422/485 with ESD protection 15 kV surge protection 600 W and 3 kV isolation extended temperature range small 1
63467 small 2
63467 small 3
63467 small 4
63467 small 5
63467 small 6
Den här produkten är inte längre tillgänglig.
Adapterverktyg

Beskrivning

This RS-232 to RS-485/422 converter by Delock is suitable for all serial devices, e.g. on machine controls, fieldbus systems, measuring instruments, printers or as RS-232 extender. The connected components are protected against surge power by the integrated protection circuits of the converter. The optical isolation suppresses interference and prevents transmission errors as much as possible. The converter is suitable for DIN rail mounting.


Specifikationer

  • Connectors:
    1 x Serial RS-232 DB9 female >
    1 x RS-422/485 Terminal Block 7 pin
  • Modes
    2 wire RS-485 (max. 32 devices)
    2 wire RS-485 (Echo Mode)
    4 wire RS-422 Point to Point
    4 wire Multi-Drop RS-485 and RS-422 (max. 10 devices)
  • ±15 kV ESD protection on all signal pins
  • 3 kV optical isolation
  • Power Supply: 10 V - 30 V / 0.5 A
  • Surge Protection: 600 W peak pulse
  • Data transfer rate up to 921.6 Kbps
  • Databits: 5, 6, 7, 8
  • Stop bits: 1, 1.5, 2
  • Parity: even, odd, none, mark, space
  • Flow control: none, software XON / XOFF
  • 3 x LED indicator
  • Operating temperature: - 30 °C ~ 75 °C
  • Storage temperature: - 40 °C ~ 85 °C
  • Relative humidity: 5 - 95 % (non condensing)
  • Housing material: plastic
  • Dimensions (LxWxH): ca. 80 x 42 x 22 mm


Systemkrav

  • Device with one free RS-422/485 interface
  • Device with one free RS-232 interface


Paketets innehåll

  • Converter
  • Mounting for 35 mm DIN rail
  • User manual


General
Funktion
• optical isolation
• Auto RTS Control
Mounting type
• DIN rail 35 mm
Specifikationer
• RS-232 (EIA / TIA)
• RS-422 / RS-485 (EIA / TIA)
Supported operating system
• Oberoende av operativsystem, ingen drivrutinsinstallation krävs
LED indikator
• 3 x PWR / RXD / TXD
Protection
• Input overvoltage protection
• ESD (Electrostatic Discharge)
• 600 W max
Interface
Kontakt 1
• 1 x seriell RS-232 DB9 hona
Kontakt 2
• 1 x RS-422/485 Terminal Block 7 pin
Technical characteristics
Dataöverföringshastighet
• up to 921.6 Kbps
Storage temperature
• -40 °C ~ 85 °C
Driftstemperatur
• -30 °C ~ 75 °C
Humidity
• 5 ~ 95 %
Data transmission
• asynchronous
• full duplex
Physical characteristics
Höljets material
• Plast
Längd
• 96.7 mm
Width
• 42 mm
Height
• 22.2 mm
Färg
• svart
Overvoltage protection
• 15 kV RS-422 / RS-485
Alla namn och symboler som nämns häri är egendomar som tillhör respektive tillverkare. Tryckfel, ändringar och fel undantagna.